Skip to content
Home DTC Codes U0044 Medium · 30-60min
U0044 Critical

OBD2 code U0044: Vehicle Communication Bus B (-) High

Bus B low-side line voltage above expected range.

ECU: ECM

Detected Root Component

Network Component

Confidence level: low

Observed Symptoms

  • Multiple warning lights may illuminate
  • Affected modules may go into limp mode or shut down
  • Specific functions inoperative depending on module
  • Diagnostic tools may show communication faults

Possible Causes

  • Wire shorted to battery
  • Gateway module routing CAN messages incorrectly
  • CAN terminating resistor (120 Ω) drifted out of spec
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 3 tool(s)

Tools Required

multimeter OBD scanner wiring diagram

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Moteur (général))

Moteur (général)

Moteur (général)

Photo d'illustration : Moteur (général)

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code U0044

What does code U0044 mean? ▾

OBD2 code U0044: Vehicle Communication Bus B (-) High. Bus B low-side line voltage above expected range.

What are the symptoms of code U0044? ▾

Code U0044 may cause: Multiple warning lights may illuminate, Affected modules may go into limp mode or shut down, Specific functions inoperative depending on module, Diagnostic tools may show communication faults. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code U0044? ▾

The most common causes of code U0044 are: Wire shorted to battery, Gateway module routing CAN messages incorrectly, CAN terminating resistor (120 Ω) drifted out of spec. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code U0044? ▾

Yes, code U0044 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.

How do I fix code U0044? ▾

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Wire shorted to battery, Gateway module routing CAN messages incorrectly, CAN terminating resistor (120 Ω) drifted out of spec. Difficulty: Medium · Estimated time: 30-60min.