OBD2 code U0027: Low Speed CAN Communication Bus (-) High
CAN-Low on the low-speed bus is shorted to battery.
Detected Root Component
Network Component
Observed Symptoms
- Multiple warning lights may illuminate
- Affected modules may go into limp mode or shut down
- Specific functions inoperative depending on module
- Diagnostic tools may show communication faults
Possible Causes
- CAN-Low shorted to battery
- Gateway module routing CAN messages incorrectly
- CAN terminating resistor (120 Ω) drifted out of spec
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Moteur (général))
Moteur (général)
Photo d'illustration : Moteur (général)
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code U0027
What does code U0027 mean? ▾
OBD2 code U0027: Low Speed CAN Communication Bus (-) High. CAN-Low on the low-speed bus is shorted to battery.
What are the symptoms of code U0027? ▾
Code U0027 may cause: Multiple warning lights may illuminate, Affected modules may go into limp mode or shut down, Specific functions inoperative depending on module, Diagnostic tools may show communication faults. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code U0027? ▾
The most common causes of code U0027 are: CAN-Low shorted to battery, Gateway module routing CAN messages incorrectly, CAN terminating resistor (120 Ω) drifted out of spec. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code U0027? ▾
Yes, code U0027 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.
How do I fix code U0027? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: CAN-Low shorted to battery, Gateway module routing CAN messages incorrectly, CAN terminating resistor (120 Ω) drifted out of spec. Difficulty: Medium · Estimated time: 30-60min.