OBD2 Code P2806: Fuel System - Pressure/Flow
Fuel pressure or flow rate out of specification.
Detected Root Component
Powertrain Component
Observed Symptoms
- Engine light on (MIL/Check Engine)
- Unable to start
- Engine stalling
- Loss of engine power
- Hesitation when accelerating
Possible Causes
- Faulty fuel pump
- Faulty pressure regulator
- Clogged or faulty injector
- Clogged fuel filter
- Defective sensor
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Moteur (général))
Moteur (général)
Photo d'illustration : Moteur (général)
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code P2806
What does code P2806 mean? ▾
OBD2 Code P2806: Fuel System - Pressure/Flow. Fuel pressure or flow rate out of specification.
What are the symptoms of code P2806? ▾
Code P2806 may cause: Engine light on (MIL/Check Engine), Unable to start, Engine stalling, Loss of engine power. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code P2806? ▾
The most common causes of code P2806 are: Faulty fuel pump, Faulty pressure regulator, Clogged or faulty injector, Clogged fuel filter. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code P2806? ▾
Yes, code P2806 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.
How do I fix code P2806? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty fuel pump, Faulty pressure regulator, Clogged or faulty injector, Clogged fuel filter. Difficulty: Medium · Estimated time: 30-60min.