OBD2 code P1305: Cylinder 5 Misfire
Manufacturer-specific powertrain code.
Detected Root Component
Powertrain Component
Observed Symptoms
- Check engin light on (MIL)
Possible Causes
- Fault in a vehicle-specific sensor, actuator or circuit
- Damaged wiring or connector
- Outdated calibration
- Faulty control module (rare)
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Moteur (général))
Moteur (général)
Photo d'illustration : Moteur (général)
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code P1305
What does code P1305 mean? ▾
OBD2 code P1305: Cylinder 5 Misfire. Manufacturer-specific powertrain code.
What are the symptoms of code P1305? ▾
Code P1305 may cause: Check engine light on (MIL). The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code P1305? ▾
The most common causes of code P1305 are: Fault in a vehicle-specific sensor, actuator or circuit, Damaged wiring or connector, Outdated calibration, Faulty control module (rare). A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code P1305? ▾
Code P1305 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code P1305? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Fault in a vehicle-specific sensor, actuator or circuit, Damaged wiring or connector, Outdated calibration, Faulty control module (rare). Difficulty: complex · Estimated time: 30-60min.