Skip to content
Home DTC Codes P0975 Medium · 30-60min
P0975 Warning

OBD2 code P0975: Miscellaneous engine sensors

Engine auxiliary sensor fault.

ECU: ECM

Detected Root Component

Powertrain Component

Confidence level: low

Observed Symptoms

  • Engine light on (MIL/Check Engine)
  • Rough or unstable slow motion

Possible Causes

  • Defective sensor
  • Damaged wiring
  • Corroded connector
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 5 tool(s)

Tools Required

multimeter OBD scanner wiring diagram test light oscilloscope (optional)

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Moteur (général))

Moteur (général)

Moteur (général)

Photo d'illustration : Moteur (général)

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code P0975

What does code P0975 mean?

OBD2 code P0975: Miscellaneous engine sensors. Engine auxiliary sensor fault.

What are the symptoms of code P0975?

Code P0975 may cause: Engine light on (MIL/Check Engine), Rough or unstable slow motion. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code P0975?

The most common causes of code P0975 are: Defective sensor, Damaged wiring, Corroded connector. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code P0975?

Code P0975 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.

How do I fix code P0975?

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Defective sensor, Damaged wiring, Corroded connector. Difficulty: Medium · Estimated time: 30-60min.