Skip to content
Home DTC Codes P0504 Medium · 30-60min
P0504 Warning

OBD2 code P0504: Vehicle speed / Idle control

Speed ​​or idle sensor fault.

ECU: ECM

Detected Root Component

Powertrain Component

Confidence level: low

Observed Symptoms

  • Engine light on (MIL/Check Engine)
  • Rough or unstable slow motion
  • Slow throttle response

Possible Causes

  • Faulty speed sensor
  • Dirty or faulty throttle body
  • Faulty idle motor
  • Damaged wiring
  • Vacuum leak
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 4 tool(s)

Tools Required

multimeter OBD scanner wiring diagram back-probing pins

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Pompe à carburant)

Pompe à carburant

Pompe à carburant

Photo d'illustration : Pompe à carburant

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code P0504

What does code P0504 mean?

OBD2 code P0504: Vehicle speed / Idle control. Speed ​​or idle sensor fault.

What are the symptoms of code P0504?

Code P0504 may cause: Engine light on (MIL/Check Engine), Rough or unstable slow motion, Slow throttle response. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code P0504?

The most common causes of code P0504 are: Faulty speed sensor, Dirty or faulty throttle body, Faulty idle motor, Damaged wiring. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code P0504?

Code P0504 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.

How do I fix code P0504?

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty speed sensor, Dirty or faulty throttle body, Faulty idle motor, Damaged wiring. Difficulty: Medium · Estimated time: 30-60min.