OBD2 code P0154: Mass air flow / intake pressure sensor – symptoms, causes & step-by-step diagn
P0154: MAF or MAP sensor fault Common symptoms: Engine light on (MIL/Check Engine), Rough or unstable slow motion. Inspect Faulty air flow meter (MAF) and.
Detected Root Component
Oxygen Sensor
Technical Component Diagrams
Oxygen Sensor Layout
Diag Expert technical diagram
Oxygen Sensor Connector
Diag Expert technical diagram
Observed Symptoms
- Engine light on (MIL/Check Engine)
- Rough or unstable slow motion
- Loss of engine power
- Excessive fuel consumption
Possible Causes
- Faulty air flow meter (MAF)
- Faulty MAP sensor
- Vacuum leak
- Damaged wiring
- Corroded connector
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Sonde O2 / Lambda)
Sonde O2 / Lambda
Photo d'illustration : Sonde O2 / Lambda
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code P0154
What does code P0154 mean? ▾
OBD2 code P0154: Mass air flow / intake pressure sensor – symptoms, causes & step-by-step diagn. P0154: MAF or MAP sensor fault Common symptoms: Engine light on (MIL/Check Engine), Rough or unstable slow motion. Inspect Faulty air flow meter (MAF) and.
What are the symptoms of code P0154? ▾
Code P0154 may cause: Engine light on (MIL/Check Engine), Rough or unstable slow motion, Loss of engine power, Excessive fuel consumption. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code P0154? ▾
The most common causes of code P0154 are: Faulty air flow meter (MAF), Faulty MAP sensor, Vacuum leak, Damaged wiring. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code P0154? ▾
Code P0154 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code P0154? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty air flow meter (MAF), Faulty MAP sensor, Vacuum leak, Damaged wiring. Difficulty: Medium · Estimated time: 30-60min.