Skip to content
Home DTC Codes P0134 Medium · 30-60min
P0134 Warning

OBD2 code P0134: Mass air flow / intake pressure sensor

MAF or MAP sensor fault.

ECU: ECM

Detected Root Component

Oxygen Sensor

Confidence level: medium

Technical Component Diagrams

Oxygen Sensor Layout

Oxygen Sensor Layout

Diag Expert technical diagram

Oxygen Sensor Connector

Oxygen Sensor Connector

Diag Expert technical diagram

Observed Symptoms

  • Engine light on (MIL/Check Engine)
  • Rough or unstable slow motion
  • Loss of engine power
  • Excessive fuel consumption

Possible Causes

  • Faulty air flow meter (MAF)
  • Faulty MAP sensr
  • Vacuum leak
  • Damaged wiring
  • Corroded connector
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 5 tool(s)

Tools Required

multimeter OBD scanner wiring diagram brake cleaner (or propane torch) backprobe pins

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Sonde O2 / Lambda)

Sonde O2 / Lambda

Sonde O2 / Lambda

Photo d'illustration : Sonde O2 / Lambda

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code P0134

What does code P0134 mean?

OBD2 code P0134: Mass air flow / intake pressure sensor. MAF or MAP sensor fault.

What are the symptoms of code P0134?

Code P0134 may cause: Engine light on (MIL/Check Engine), Rough or unstable slow motion, Loss of engine power, Excessive fuel consumption. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code P0134?

The most common causes of code P0134 are: Faulty air flow meter (MAF), Faulty MAP sensor, Vacuum leak, Damaged wiring. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code P0134?

Code P0134 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.

How do I fix code P0134?

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty air flow meter (MAF), Faulty MAP sensor, Vacuum leak, Damaged wiring. Difficulty: Medium · Estimated time: 30-60min.