OBD2 code P0114: Mass air flow / intake pressure sensor
MAF or MAP sensor fault.
Detected Root Component
MAF Sensor
Technical Component Diagrams
MAF Sensor Layout
Diag Expert technical diagram
MAF Sensor Connector
Diag Expert technical diagram
Observed Symptoms
- Engine light on (MIL/Check Engine)
- Rough or unstable slow motion
- Loss of engine power
- Excessive fuel consumption
Possible Causes
- Faulty air flow meter (MAF)
- Faulty MAP sensor
- Vacuum leak
- Damaged wiring
- Corroded connector
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Thermostat / Refroidissement)
Thermostat / Refroidissement
Photo d'illustration : Thermostat / Refroidissement
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code P0114
What does code P0114 mean? ▾
OBD2 code P0114: Mass air flow / intake pressure sensor. MAF or MAP sensor fault.
What are the symptoms of code P0114? ▾
Code P0114 may cause: Engine light on (MIL/Check Engine), Rough or unstable slow motion, Loss of engine power, Excessive fuel consumption. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code P0114? ▾
The most common causes of code P0114 are: Faulty air flow meter (MAF), Faulty MAP sensor, Vacuum leak, Damaged wiring. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code P0114? ▾
Code P0114 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code P0114? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty air flow meter (MAF), Faulty MAP sensor, Vacuum leak, Damaged wiring. Difficulty: Medium · Estimated time: 30-60min.