Skip to content
Home DTC Codes P0090 Medium · 30-60min
P0090 Warning

OBD2 Code P0090: Fuel Flow Regulator - Open Circuit/Out of Range

Fuel flow regulation problem.

ECU: ECM

Detected Root Component

Powertrain Component

Confidence level: low

Observed Symptoms

  • Engine light on (MIL/Check Engine)
  • Hesitation when accelerating
  • Excessive fuel consumption

Possible Causes

  • Faulty fuel pump
  • Faulty pressure regulator
  • Damaged wiring
  • Clogged or faulty injector
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 5 tool(s)

Tools Required

multimeter OBD scanner wiring diagram back-probe pins test light

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Moteur (général))

Moteur (général)

Moteur (général)

Photo d'illustration : Moteur (général)

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code P0090

What does code P0090 mean?

OBD2 Code P0090: Fuel Flow Regulator - Open Circuit/Out of Range. Fuel flow regulation problem.

What are the symptoms of code P0090?

Code P0090 may cause: Engine light on (MIL/Check Engine), Hesitation when accelerating, Excessive fuel consumption. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code P0090?

The most common causes of code P0090 are: Faulty fuel pump, Faulty pressure regulator, Damaged wiring, Clogged or faulty injector. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code P0090?

Code P0090 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.

How do I fix code P0090?

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty fuel pump, Faulty pressure regulator, Damaged wiring, Clogged or faulty injector. Difficulty: Medium · Estimated time: 30-60min.