OBD2 code P0007: Fuel Shutoff Valve A Control Circuit High
The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply.
Detected Root Component
Powertrain Component
Observed Symptoms
- Check engine light on
- Hard starting or no start
- Engine stalls
Possible Causes
- Control wire open or shorted to battery voltage
- Valve coil open
- Connector fault at the valve
- Output driver in the engine control module faulty
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Moteur (général))
Moteur (général)
Photo d'illustration : Moteur (général)
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code P0007
What does code P0007 mean? ▾
OBD2 code P0007: Fuel Shutoff Valve A Control Circuit High. The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply.
What are the symptoms of code P0007? ▾
Code P0007 may cause: Check engine light on, Hard starting or no start, Engine stalls. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code P0007? ▾
The most common causes of code P0007 are: Control wire open or shorted to battery voltage, Valve coil open, Connector fault at the valve, Output driver in the engine control module faulty. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code P0007? ▾
Code P0007 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code P0007? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Control wire open or shorted to battery voltage, Valve coil open, Connector fault at the valve, Output driver in the engine control module faulty. Difficulty: Medium · Estimated time: 30-60min.