OBD2 code P0006: Fuel Shutoff Valve A Control Circuit Low
The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply.
Detected Root Component
Powertrain Component
Observed Symptoms
- Check engin light on
- Hard starting or no start
- Engine stalls
Possible Causes
- Short to ground in the harness
- Shorted turns in the valve coil
- Corroded connector
- Output driver in the engin control module faulty
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Moteur (général))
Moteur (général)
Photo d'illustration : Moteur (général)
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code P0006
What does code P0006 mean? ▾
OBD2 code P0006: Fuel Shutoff Valve A Control Circuit Low. The fuel shutoff valve is a solenoid valve that opens or blocks the fuel supply.
What are the symptoms of code P0006? ▾
Code P0006 may cause: Check engine light on, Hard starting or no start, Engine stalls. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code P0006? ▾
The most common causes of code P0006 are: Short to ground in the harness, Shorted turns in the valve coil, Corroded connector, Output driver in the engine control module faulty. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code P0006? ▾
Code P0006 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code P0006? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Short to ground in the harness, Shorted turns in the valve coil, Corroded connector, Output driver in the engine control module faulty. Difficulty: Medium · Estimated time: 30-60min.