OBD2 code C1476: Chassis system - Anomaly detected
Chassis system abnormality detected.
Detected Root Component
Chassis Component
Observed Symptoms
- Dashboard errors
- Rigid or uncomfortable suspension
Possible Causes
- Defective sensor
- Faulty BCM module
- Damaged wiring
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Capteur ABS)
Capteur ABS
Photo d'illustration : Capteur ABS
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code C1476
What does code C1476 mean? ▾
OBD2 code C1476: Chassis system - Anomaly detected. Chassis system abnormality detected.
What are the symptoms of code C1476? ▾
Code C1476 may cause: Dashboard errors, Rigid or uncomfortable suspension. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code C1476? ▾
The most common causes of code C1476 are: Defective sensor, Faulty BCM module, Damaged wiring. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code C1476? ▾
Code C1476 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code C1476? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Defective sensor, Faulty BCM module, Damaged wiring. Difficulty: Medium · Estimated time: 30-60min.