OBD2 code C1002: Manufacturer-specific code
C codes cover chassis systems (ABS, steering, suspension); the precise meaning is manufacturer-specific.
Detected Root Component
Chassis Component
Observed Symptoms
- Warning lights on instrument cluster
- ABS or ESP/ESC light on
Possible Causes
- Faulty sensor or actuator in the affected circuit
- Damaged wiring or connector
- Corroded connector
- Faulty control module
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Capteur ABS)
Capteur ABS
Photo d'illustration : Capteur ABS
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code C1002
What does code C1002 mean? ▾
OBD2 code C1002: Manufacturer-specific code. C codes cover chassis systems (ABS, steering, suspension); the precise meaning is manufacturer-specific.
What are the symptoms of code C1002? ▾
Code C1002 may cause: Warning lights on instrument cluster, ABS or ESP/ESC light on. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code C1002? ▾
The most common causes of code C1002 are: Faulty sensor or actuator in the affected circuit, Damaged wiring or connector, Corroded connector, Faulty control module. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code C1002? ▾
Code C1002 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code C1002? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty sensor or actuator in the affected circuit, Damaged wiring or connector, Corroded connector, Faulty control module. Difficulty: Medium · Estimated time: 30-60min.