OBD2 Code C0103: Suspension - Sensor or Actuator
Piloted suspension malfunction.
Detected Root Component
Chassis Component
Observed Symptoms
- Rigid or uncomfortable suspension
- Excessive body roll when cornering
- Dashboard errors
Possible Causes
- Defective sensor
- Damaged wiring
- Corroded connector
- Faulty BCM module
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Capteur ABS)
Capteur ABS
Photo d'illustration : Capteur ABS
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code C0103
What does code C0103 mean? ▾
OBD2 Code C0103: Suspension - Sensor or Actuator. Piloted suspension malfunction.
What are the symptoms of code C0103? ▾
Code C0103 may cause: Rigid or uncomfortable suspension, Excessive body roll when cornering, Dashboard errors. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code C0103? ▾
The most common causes of code C0103 are: Defective sensor, Damaged wiring, Corroded connector, Faulty BCM module. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code C0103? ▾
Code C0103 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.
How do I fix code C0103? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Defective sensor, Damaged wiring, Corroded connector, Faulty BCM module. Difficulty: Medium · Estimated time: 30-60min.