Skip to content
Home DTC Codes C0046 Medium · 30-60min
C0046 Critical

OBD2 code C0046: Right Front Wheel Speed Sensor Circuit Intermittent

Intermittent open or short on the right front wheel speed sensor circuit.

ECU: ABS

Detected Root Component

Chassis Component

Confidence level: low

Observed Symptoms

  • ABS warning light on
  • ESC/stability control deactivated
  • Possible reduced brake assist
  • Speedometer may behave erratically

Possible Causes

  • Connector unseated
  • Wire chafe on bracket
  • Connector with intermittent contact under vibration
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 6 tool(s)

Tools Required

multimeter OBD scanner wiring diagram oscilloscope (optional) floor jack safety stands

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Capteur ABS)

Capteur ABS

Capteur ABS

Photo d'illustration : Capteur ABS

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code C0046

What does code C0046 mean? ▾

OBD2 code C0046: Right Front Wheel Speed Sensor Circuit Intermittent. Intermittent open or short on the right front wheel speed sensor circuit.

What are the symptoms of code C0046? ▾

Code C0046 may cause: ABS warning light on, ESC/stability control deactivated, Possible reduced brake assist, Speedometer may behave erratically. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code C0046? ▾

The most common causes of code C0046 are: Connector unseated, Wire chafe on bracket, Connector with intermittent contact under vibration. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code C0046? ▾

Yes, code C0046 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.

How do I fix code C0046? ▾

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Connector unseated, Wire chafe on bracket, Connector with intermittent contact under vibration. Difficulty: Medium · Estimated time: 30-60min.