OBD2 code C0035: Left Front Wheel Speed Sensor Circuit Malfunction
The ABS control module has detected a fault in the left front wheel speed sensor circuit.
Detected Root Component
Chassis Component
Observed Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Possible Causes
- Wheel speed sensor failed
- Tone ring (reluctor) damaged or contaminated with debris
- Wiring break or chafe at wheel arch
- Wheel hub bearing with integrated sensor ring failed
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Capteur ABS)
Capteur ABS
Photo d'illustration : Capteur ABS
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code C0035
What does code C0035 mean? ▾
OBD2 code C0035: Left Front Wheel Speed Sensor Circuit Malfunction. The ABS control module has detected a fault in the left front wheel speed sensor circuit.
What are the symptoms of code C0035? ▾
Code C0035 may cause: ABS warning light on, ESC/stability control deactivated, Possible reduced brake assist, Speedometer may behave erratically. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code C0035? ▾
The most common causes of code C0035 are: Wheel speed sensor failed, Tone ring (reluctor) damaged or contaminated with debris, Wiring break or chafe at wheel arch, Wheel hub bearing with integrated sensor ring failed. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code C0035? ▾
Yes, code C0035 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.
How do I fix code C0035? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Wheel speed sensor failed, Tone ring (reluctor) damaged or contaminated with debris, Wiring break or chafe at wheel arch, Wheel hub bearing with integrated sensor ring failed. Difficulty: Medium · Estimated time: 30-60min.