Skip to content
Home DTC Codes C0031 Medium · 30-60min
C0031 Critical

OBD2 code C0031: Left Front Wheel Speed Sensor Circuit Low

Voltage on the left front wheel speed sensor circuit is below the expected range.

ECU: ABS

Detected Root Component

Chassis Component

Confidence level: low

Observed Symptoms

  • ABS warning light on
  • ESC/stability control deactivated
  • Possible reduced brake assist
  • Speedometer may behave erratically

Possible Causes

  • Sensor wiring shorted to ground
  • Sensor coil open internally
  • Connector pins corroded - high contact resistance
Diagnostic Progress 0 %
Difficulty Medium
Est. time 30-60min
Tools Required 4 tool(s)

Tools Required

multimeter OBD scanner wiring diagram oscilloscope (optional)

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Capteur ABS)

Capteur ABS

Capteur ABS

Photo d'illustration : Capteur ABS

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code C0031

What does code C0031 mean? ▾

OBD2 code C0031: Left Front Wheel Speed Sensor Circuit Low. Voltage on the left front wheel speed sensor circuit is below the expected range.

What are the symptoms of code C0031? ▾

Code C0031 may cause: ABS warning light on, ESC/stability control deactivated, Possible reduced brake assist, Speedometer may behave erratically. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code C0031? ▾

The most common causes of code C0031 are: Sensor wiring shorted to ground, Sensor coil open internally, Connector pins corroded - high contact resistance. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code C0031? ▾

Yes, code C0031 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.

How do I fix code C0031? ▾

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Sensor wiring shorted to ground, Sensor coil open internally, Connector pins corroded - high contact resistance. Difficulty: Medium · Estimated time: 30-60min.