OBD2 code C0022: ABS Pump Motor Circuit Low
Voltage on the pump motor control line is below threshold.
Detected Root Component
Chassis Component
Observed Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Possible Causes
- Wiring shorted to ground
- Pump motor relay failed
- Connector pins corroded - high contact resistance
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Capteur ABS)
Capteur ABS
Photo d'illustration : Capteur ABS
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code C0022
What does code C0022 mean? ▾
OBD2 code C0022: ABS Pump Motor Circuit Low. Voltage on the pump motor control line is below threshold.
What are the symptoms of code C0022? ▾
Code C0022 may cause: ABS warning light on, ESC/stability control deactivated, Possible reduced brake assist, Speedometer may behave erratically. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code C0022? ▾
The most common causes of code C0022 are: Wiring shorted to ground, Pump motor relay failed, Connector pins corroded - high contact resistance. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code C0022? ▾
Yes, code C0022 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.
How do I fix code C0022? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Wiring shorted to ground, Pump motor relay failed, Connector pins corroded - high contact resistance. Difficulty: Medium · Estimated time: 30-60min.