OBD2 code C0010: Left Front Inlet Control
Fault on left front ABS inlet (apply) valve.
Detected Root Component
Chassis Component
Observed Symptoms
- ABS warning light on
- ESC/stability control deactivated
- Possible reduced brake assist
- Speedometer may behave erratically
Possible Causes
- Valve stuck or coil failed
Tools Required
Interactive Diagnostic
Answer each question to calculate your diagnostic score.
No steps available.
Diagnostic Result
Score threshold guide
Was this diagnostic helpful?
Parts likely to be the cause (Capteur ABS)
Capteur ABS
Photo d'illustration : Capteur ABS
© DTC-Logic.com
Click on an image to enlarge
Frequently asked questions about code C0010
What does code C0010 mean? ▾
OBD2 code C0010: Left Front Inlet Control. Fault on left front ABS inlet (apply) valve.
What are the symptoms of code C0010? ▾
Code C0010 may cause: ABS warning light on, ESC/stability control deactivated, Possible reduced brake assist, Speedometer may behave erratically. The intensity of these symptoms varies depending on the vehicle and driving conditions.
What causes code C0010? ▾
The most common causes of code C0010 are: Valve stuck or coil failed. A proper OBD2 diagnostic will pinpoint the exact cause.
Is it serious to drive with code C0010? ▾
Yes, code C0010 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.
How do I fix code C0010? ▾
Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Valve stuck or coil failed. Difficulty: Medium · Estimated time: 30-60min.