Skip to content
Home DTC Codes B0468 Medium · 45-90min
B0468 Warning

OBD2 code B0468: Anti-theft/alarm system

Anti-theft system fault.

ECU: BCM

Detected Root Component

Body Component

Confidence level: low

Observed Symptoms

  • Faulty central locking
  • Dashboard errors
  • Unable to start

Possible Causes

  • Faulty BCM module
  • Defective sensor
  • Incorrect module configuration
  • Damaged wiring
Diagnostic Progress 0 %
Difficulty Medium
Est. time 45-90min
Tools Required 6 tool(s)

Tools Required

multimeter oscilloscope (or graphing multimeter) OBD scanner with live data & bi-directional controls wiring diagram back-probing pins digital torque wrench (if recalibration required)

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Boîtier fusibles / BSI)

Boîtier fusibles / BSI

Boîtier fusibles / BSI

Photo d'illustration : Boîtier fusibles / BSI

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code B0468

What does code B0468 mean?

OBD2 code B0468: Anti-theft/alarm system. Anti-theft system fault.

What are the symptoms of code B0468?

Code B0468 may cause: Faulty central locking, Dashboard errors, Unable to start. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code B0468?

The most common causes of code B0468 are: Faulty BCM module, Defective sensor, Incorrect module configuration, Damaged wiring. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code B0468?

Code B0468 has moderate severity (Warning). Short-term driving remains possible, but a prompt check is recommended to prevent worsening.

How do I fix code B0468?

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Faulty BCM module, Defective sensor, Incorrect module configuration, Damaged wiring. Difficulty: Medium · Estimated time: 45-90min.