Skip to content
Home DTC Codes B0001 Easy · 30-60min
B0001 Critical

OBD2 code B0001: Driver Frontal Stage 1 Deployment Control

The supplemental restraint system (SRS) module has detected a fault in the deployment control circuit for the first stage of the driver frontal airbag.

ECU: SRS

Detected Root Component

Body Component

Confidence level: low

Observed Symptoms

  • Warning light or symbol related to the affected system
  • Comfort or safety function impaired

Possible Causes

  • Clock spring (spiral cable) damaged in steering column
  • Loose or corroded airbag connector under steering wheel
  • SRS control module internal fault
Diagnostic Progress 0 %
Difficulty Easy
Est. time 30-60min
Tools Required 5 tool(s)

Tools Required

multimeter OBD scanner wiring diagram airbag simulator resistor (2.5Ω, 5W) insulated tools

Interactive Diagnostic

Answer each question to calculate your diagnostic score.

Diagnostic Result

0
certainty points

Recommended action:

Find the part:

Answer the questions above to get the result.

Was this diagnostic helpful?

Parts likely to be the cause (Boîtier fusibles / BSI)

Boîtier fusibles / BSI

Boîtier fusibles / BSI

Photo d'illustration : Boîtier fusibles / BSI

© DTC-Logic.com

Click on an image to enlarge

Frequently asked questions about code B0001

What does code B0001 mean? ▾

OBD2 code B0001: Driver Frontal Stage 1 Deployment Control. The supplemental restraint system (SRS) module has detected a fault in the deployment control circuit for the first stage of the driver frontal airbag.

What are the symptoms of code B0001? ▾

Code B0001 may cause: Warning light or symbol related to the affected system, Comfort or safety function impaired. The intensity of these symptoms varies depending on the vehicle and driving conditions.

What causes code B0001? ▾

The most common causes of code B0001 are: Clock spring (spiral cable) damaged in steering column, Loose or corroded airbag connector under steering wheel, SRS control module internal fault. A proper OBD2 diagnostic will pinpoint the exact cause.

Is it serious to drive with code B0001? ▾

Yes, code B0001 is critical (Critical). Avoid driving and consult a professional promptly to prevent major damage.

How do I fix code B0001? ▾

Start by reading the code with an OBD2 scanner, then follow the interactive decision tree on this page. Priority causes to check: Clock spring (spiral cable) damaged in steering column, Loose or corroded airbag connector under steering wheel, SRS control module internal fault. Difficulty: Easy · Estimated time: 30-60min.